Configure the video parameters as follows: 

1. In the field (1), select the fps rate when connecting to Internet via WiFi and 3G: Maximum: 9 fps, Medium: 6 fps, Slow: 3 fps.
   

   These settings are valid only when connecting to the Intellect software package.

   
   

2. Select the video resolution (2):
   1. Auto - when your mobile device has a slow Internet connection, the degradation of image quality algorithm is applied for the image resolution (1).
   2. QCIF - display video with constant resolution 176 × 144 (2).

   3. Max - display video with original resolution (3).
      

      These restrictions are recommended when your mobile device has a slow Internet connection.

      
      

3. Select one of the following playback formats in the Video parameter (1):
   

   • MJPEG

   • MJPEG ffmpeg

   • H.264 RTSP (ffmpeg) — the video is displayed in the original format via the RTSP protocol;

   • MP4 (ffmpeg) — less resource-intensive than mjpeg, supports the H.265 codec.

   Displaying the video in the original resolution is enabled only for the H.264 RTSP (ffmpeg) format. Using this format, it is also possible to receive audio from the Axxon Next Server for the cameras with h.264 stream.

   
   

   If the MP4 (ffmpeg) format is selected and the camera uses the H.265 stream, it is not recommended to disable the HW decoder (2).

   

   
   

4. If the H.264 RTSP (ffmpeg) format is selected:
   1. Disable the H.264 HW decoder if required (2). 

   2. Specify the RTSP port set in Intellect settings (3, see Configuring rtsp Server module).