To configure a V2000 controller's output groups, use the setup panel of the relevant Output group (V2000) object. To find this object, go to the Settings dialog box, click the Hardware tab, select the relevant VertX V2000 NC/RI object, and browse its object subtree.

To configure an output group:

  1. Go to the Output group (V2000) object's setup panel.
  2. Click Output group setup (1).
    The Output group contents window opens.

  3. To add a new controller function, click Add (1).

     To delete a controller function, select the relevant row in the table and click Delete(2).


    The Add source controller/interface window opens.

  4. In the drop-down list, select the required object that corresponds to the V2000 controller (1).
  5. Click OK (2).
  6. In the Function code column, select the controller function (3).

  7. In the State column, select the function state (4).

    For more detailed information on function states, refer to the HID system's vendor documentation.


  8. Add as many functions as needed.
  9. Click Apply to save the changes (5).
To come back to the setup panel without saving changes, click Cancel (6).

The output groups are now configured.