To get started with Axxon Next or Intellect from the iOS mobile client, first configure the servers to which the client will connect.

To do this, follow the steps below:

  1. Enter the server name (1).

  2. Enter the URL server address in the format http://<IP address of Axxon Next server>:<Port>/<Prefix> (2).

    Example URLs with standard Server settings for Axxon Next and Intellect:

    Axxon Next: 192.168.0.10:8000/asip-api

    Axxon Intellect: 192.168.0.10:8085/web2

  3. Enter the user name and password for connecting, if these have been specified (3, 4).

  4. To test the connection, tap the Test connection button (5). If the server is running, the connection settings are correct, and the device has a stable Internet connection, the message Connection successful appears. Otherwise, a message will remind you to verify these conditions.

    To perform a basic check of the web server connection and operability, in a browser on your mobile device, go to the Server's URL address (see paragraph 2)

  5. To save the server, tap the Save button (6).

The server is added to the list.

To add a new server, tap the  button and repeat the actions above.

To connect to a server, select it in the list and tap the Connect button (1).

 If necessary, you can return to the server settings (2) or remove the server (3).

If you have connected to a server but need to connect to another one:

  1. In the upper-right corner, tap the Settings button.
  2. Tap the Web Servers button.
  3. Select the necessary server and connect to it.