Transmission of audio signals to IP-device Bosch is performed with the use of Virtual Audio Cable driver.
Information about program Virtual Audio Cable one can find in official reference manual of this program. The program is not a part of the IntellectTM software. |
To set up the transmission of audio signals to IP-device Bosch do the following:
Install Virtual Audio Cable driver and set it in accordance with the figure and the table.

Driver set up utility | Group | Parameter | Description of parameter | Range of parameter’s value |
Start -> All programs -> Virtual Audio Cable -> Control Panel | Driver parameters | Cable | Number of virtual audio cables | 1 |
Cable parameters -> Format range | SR | Sampling rate of audio signals | 8000..8000 |
BPS | Depth of audio signals sampling | 16..16 |
NC | Number of channels of virtual audio cable | 2..2 |
- Start Intellect program complex.
- Go to the settings panel of system object Audio card (see Registration of audio cards and microphones in INTELLECT™ software).
- From the dropdown list Board select the required IP-device Bosch (1).

- To save the changes click Apply button (2).
- Create Microphone object on the base of this object and go to its settings panel (see Registration of audio cards and microphones in INTELLECT™ software).

- From the dropdown list Bosh sound device select the value Virtual Cable (1).
- To save the changes click Apply button (2).
- Go to the settings panel of the Audio player interface object(see Configuring audio signals playback using the Audio player object).

- Set the coordinates and size of the Audio player interface box (1).
- From the dropdown list Device select the value Virtual Cable (2).
- From the dropdown list Channel select the required chanal of audio signals playback (3).
- From the dropdown list in the column Name select the name of Microphone object which audio signal has to be transmitted to IP-device Bosch (4).
- Repeat step for all the required Microphone objects.
- To save the changes click Apply button (5).
- Restart Intellect program complex.
- Setting up the transmission of audio signals to IP-device Bosch is completed.
To enable the transmission of audio signals from the microphone to IP-device Bosh click the button (Interception from microphone) in the Audio player interface box. |