User interface (dialog window) of HubSearch.exe utility is shown in the figure.
The table shows the content of HubSearch.exe utility user interface.
Group № | group | Element’s name | description |
1 | NetAdapter Info | Dropdown list Select NetAdapter | Selection of net adapter |
Display-only field IP | Displays IP-address of computer’s netcard | ||
Display-only field Mask | Displays mask of computer’s netcard | ||
Display-only field MAC | Displays MAC-address of computer’s netcard | ||
2 | VideoHub Addresses | Field VideoHub Addresses | Displays found devices |
3 | VideoHub Properties | Switch Use DHCP | Enables protocol of dynamic site configuration |
Switch Use the following IP address | Enables net settings | ||
Field IP address | Set IP address of the device | ||
Field Subnet mask | Set address mask of the device | ||
Field Default gateway | Set the gate | ||
2 Display-only fields Device Description | Displays parameters of the device | ||
Button Apply | Is used for applying the new settings | ||
4 | Net BIOS Name | Field Net BIOS Name | Set the netname of the device |
Button Apply | Is used for applying the new settings | ||
5 | Search status | Display-only field Search status | Displays status of device search |
Button Search | Serves to start the search | ||
Button Close | Closes dialog window |