This stage includes the following:

  1. Connect LS (LH) to the local network: plug the network cable into the network socket and the corresponding LAN socket on the LS (LH).
  2. Connect LS (LH) to the power supply, plug the power cable into the 220 V mains and the corresponding power plug on the back panel of LS (LH).
  3. Turn LS (LH) on, press the power button on the front panel of LS (LH).
  4. Wait for LS (LH) system to load. It usually takes no more than one minute.

When you run LS after incorrect shutdown, there is a check of hard disks for errors that can take much time (depends on archive size).