Install additional software from the web-site for correct recognition of the carriages license plates.

Setting up the IntLab-Carriage program module is done in the following way:

  1. Go to the Hardware tab in the System settings dialog window (1).
    In the objects tree on the Hardware tab select the IntLab-Carriage module object, corresponding to the set IntLab-Carriage program module (2). The settings panel of the selected object will open on the right side of the window.
  2. From the Sensor: drop-down list select the Sensor object by event from which the plate recognition will perform (3).

  3. From the Working mode: drop-down list select the mode of recognition passenger or freight carriage numbers (4).

  4. To save changes click Apply (5).