To configure the connection of a Gate Parking controller, do the following: 

  1. Go to the settings panel of the relevant Gate parking access point object.
  2. From the Address drop-down list select the controller address (1).
  3. Click Apply.

 

If the controller with specified address is connected to the Intellect Server, you will see the following controller parameters in the Controller version group (3):

    1. controller version;
    2. controller firmware version;
    3. controller operation mode.

If the controller parameters are not shown, check the controller's connection to the computer (refer to the Gate Parking ACS vendor documentation).

 

The Gate Parking controller is now configured.