It is possible to create SNMP-service for resending messages about the registered events to SNMP-manager. This opportunity is realized with the use of SNMP trap system object.

 Data concerning SNMP-manager is given in the official SNMP protocol reference manual – see, for example, https://technet.microsoft.com/en-us/library/cc738071%28v=ws.10%29.aspx.

SNMP trap objects use the trap port 162 to send messages in Intellect.

SNMP-service carries out the following functions:

  1. Receipt of messages concerning the event, registered in the system;
  2. Message conversion concerning the event to SNMP format;
  3. Message transfer in SNMP format (trap) to SNMP-manager with the use of TCP/IP net protocol.

Setting the SNMP-service is done in the following order:

  1. Create SNMP trap object on the basis of Objects SNMP system objects (see Creating the SNMP trap object).
  2. Select the events, which messages should be transferred to SNMP-manager (see Events selection for transmitting to SNMP manager).
  3. Set the message conversion to SNMP format (see Configuring the message conversion into SNMP format).
  4. Set the trap with SNMP-message (see Setting up the trap with SNMP-message).
  5. Check the validity of SNMP configuration, if necessary (see SNMP configuration for traps receiving on remote computer).

It is not recommended to create lots of SNMP trap objects (more than 10) as it can cause system slowdown.