The Satel INTEGRA panel connection is performed on the settings panel of the Satel Panel object created on the basis of the Computer object on the Hardware tab of the System Settings dialog.

The panel may be connected to the ACFA Intellect Server via RS-232 or Ethernet interfaces.

For INTEGRA 128-WRL, a wireless GSM/GPRS connection is also available. For information on wireless connection configuration, please refer to vendor documentation: http://www.satel.pl/en/installer/man.

To connect over RS-232, do the following:

  1. Go to the settings panel of the Satel panel object.
  2. Select the RS-232 radio button in the Connection section (1).
  3. In the Port list, select the COM-port used for connection (2).
  4. Click Apply (3).

To connect over Ethernet, do the following:

  1. Go to the settings panel of the Satel Panel object.
  2. Select the TCP/IP radio button in the Connection section (1). 
  3. Enter the IP address of the panel in the field below (2). 
  4. In the TCP port field, enter the connection port (3).
  5. Click Apply (4).

Additional communication options are available for the Satel Panel.

  1. In the PIN code to control panel you may set the PIN code used to authorize the connection to the control panel (1).
  2. Set the Use user PIN code for reactions checkbox to make the panel operators (Intellect users) to enter their own PIN codes to react to events from the panel (2). The user PIN code is set in the Intellect user settings, see User registration and removal.
  3. In the Time to second PIN enter field you may select the delay between attempts to enter the PIN code in seconds (3).

  The Satel Panel object also enables configuring addition emulations to facilitate the panel operation using the Map (see Working with the Satel INTEGRA Integration Module):

  1. If the Show communication lost at all objects checkbox is set, the panel communication failures will be indicated on the object icons on the Map (1).
  2. If the Show alarms from zones at the panel icon checkbox is set, the alarms from Satel INTEGRA zones will be indicated on the Satel Panel object icon on the Map (2).
  3. If the Show armed zone at the inputs checkbox is set, the boundaries of the armed zone will be indicated on the Satel INTEGRA input icons on the Map (3).