To create access level, do the following:

1. Go to the Access levels tab of the Access Manager window (1).
   

2. Click the right mouse button in free area of access levels list and select the New item in the opened functional menu (2).
   The Edit access level will be opened. The list of access points included to the access level with specified parameters are displayed in the window. Links are grouping by type of access point.

   It is possible to set only one link for each access point.

   Name contains name of access point, its ID and name of time zone (2).

   

3. In the Name field enter name of the access level (1).

   Name of access level should be unique. If access level with such name is already exists in the system, the corresponding message will display while saving and access level won't be saved.

4. Add link of access point with time zone:

   1. If it's required to add link for reader of such type for which links are already exist in the list, click the right mouse button on the name of link and in the opened functional menu select the Add link of the same type item and go to step 5. If there is only one access point of this type for which link is not assigned, go to step 6.
      

      If links for all created readers of this type are assigned in the access level, the message about failure to create new link will display because only one link can be added for each reader.

   2. If it's required to add link for access point of new type, click the right mouse button in free area of access rules list and in the opened functional menu select the Add link of another type item and go to step 5. If there is only one access point for which link is not assigned, go to step 6.
       

      

      If links for all created readers in the system are assigned in the access levels, the message about failure to create new link will display because only one link can be added for each reader.

      To delete link click the right mouse button on it and select the Delete item in the opened functional menu. To delete all links of some type, click the right mouse button on the type name and select  the Delete link of the same type item in the opened functional menu.

      When type of rule is selected, the Search for access point window will be opened. In this window all access point are grouped by object types in the ACFA Intellect software.
      

5. Find and select access point as follows:
   1. Select type of access point from the Type drop-down list if it's required (1).
   2. Enter name of access point or its part in the Name field if it's required (2).
   3. Enter ID of required access point in the ID field if it's required (3).
   4. To search access points satisfying to entered parameters, click the Enter button on the keyboard. The list of search results will be displayed (4).
   5. Double click in the list (4) on required access points. As result, selected access points will be bolded.
   6. Click OK button when access points are selected (5).
6. The panel of access level configuring will be displayed at the bottom of the Edit access level window.
   
   
7. Access point specified in the search is selected in the Access point drop-down list ( see step 5)  or the first from free access points of selected type. Select the access point through which access will be allowed with configured access level from the Access point drop-down list if it's required (1).
   Click the  button and go to step 5 if it's required to search for access point.

8. From the Time zone drop-down list select time zone during which access through the selected access point will be allowed to users with configured access level (2).  
   Click the  button if it's required to search for required time zone - see the Working with the Search for time zone window section.

   Time zones are created and configured on the Time zones tab of the Access Manager window - see the Working with time zones in the Access Manager software module section. Also it's possible to use system time zones "Always" and "Never".

9. Set the Arm checkbox to arm access point after presenting access card by user (3).
10. Set the Disarm checkbox to disarm access point after presenting access card by user (4).

11. If it's not required to send access cards to controller after presenting access card by user, set the Do not load checkbox (5).
     

    Functions of arming, disarming and sending access cards should be supported by hardware.

    Function of the Do not load checkbox can differ depending on the integration module in use. For example, in PERCo-S-20 integration this checkbox enables commission mode.

12. Repeat steps 3-11 for all required links.
13. Click the Save button (6).

Created access level will be displayed in the list.

Creating of access level is completed.