To create access level, do the following:

1. Go to the Access levels tab of the Access Manager window (1).
   

2. There are two ways to create a new access level:

   1. Right-click in the free area of the access level list and select Create root level (1) in the functional menu. In this case, the access level will be created in the root list of access levels.
      
   2. Right-click the folder and select Create access level (2). In this case, the access level will be created in the selected folder.
      
3. If you select any of the commands, the Edit access level window will open, enabling you with the following actions:
   
   

   1. In the Name field enter name of the access level (1).

      Name of access level should be unique. If access level with such name is already exists in the system, the corresponding message will display while saving and access level won't be saved.

   2. Add link between the access point and the time zone. This can be done in two ways either.

      1. If it's required to add link for reader of such type for which links are already exist in the list, click the right mouse button on the name of link and in the opened functional menu select the Add link of the same type item and go to step 4. If there is only one access point of this type for which link is not assigned, go to step 4.
         

      2. If it's required to add link for access point of new type, click the right mouse button in free area of access rules list and in the opened functional menu select the Add link of another type item and go to step 4. If there is only one access point for which link is not assigned, go to step 4.

         

         If links for all created readers of this type are assigned in the access level, the message about failure to create new link will display because only one link can be added for each reader.

4. When type of rule is selected, the Search for access point window will be opened. In this window all access point are grouped by object types in the ACFA Intellect software. To search for and select an access point, you must do the following:
   
   
   
   1. Find and select access point as follows:
   2. Select type of access point from the Type drop-down list if it's required (1).
   3. Select the location of the access point from the Area drop-down list if it's required (2).
   4. Select the location of the access point from the Region drop-down list if it's required (3)
   5. Enter name of access point or its part in the Name field if it's required (4).
   6. Enter ID of required access point in the ID field if it's required (5).
   7. The saech will be performed automatically. The list of search results will be displayed below (6).
   8. Double-clicking the required access points, thus highlighting them in bold.
   9. Click OK button when access points are selected (7).

5. You will go back to the Edit access level window. The panel for configuring the access level will be displayed at the bottom.

   
   

6. Access point specified in the search is selected in the Access point drop-down list (see step 4) or the first from free access points of selected type. Select the access point through which access will be allowed with configured access level from the Access point drop-down list if it's required (1).
   Click the  button and go to step 4 if it's required to search for access point.

7. From the Time zone drop-down list select time zone during which access through the selected access point will be allowed to users with configured access level (2).  
   Click the  button if it's required to search for required time zone - see the Working with the Search for time zone window section.

   Time zones are created and configured on the Time zones tab of the Access Manager window - see the Working with time zones in the Access Manager software module section. Also it's possible to use system time zones "Always" and "Never".

8. Set the Arm checkbox to arm access point after presenting access card by user (3).
9. Set the Disarm checkbox to disarm access point after presenting access card by user (4).

10. If it's not required to send access cards to controller after presenting access card by user, set the Do not load checkbox (5).

    Functions of arming, disarming and sending access cards should be supported by hardware.

    Function of the Do not load checkbox can differ depending on the integration module in use. For example, in PERCo-S-20 integration this checkbox enables commission mode.

11. Repeat steps 3-10 for all required links.
12. Click the Save button (6).

Created access level will be displayed in the list.

Creating of access level is completed.