To set the parameters of connecting Clients to the Web-server, do the following:
Go to the General settings tab on the settings panel of the Web-server object (1).
In the Number of connections field of the Http-server group specify the maximum permissible simultaneous connections to Web-server via Http protocol (2). The less there are connections, the less Server load is. This parameter is selected experimentally.
Connections are used to receive video (live or archive), to receive audio (live or archive), to send audio to INTELLECT™, to get data on configuration, to send commands to INTELLECT™, etc. The Client can use the same connection to perform several actions. |
If data is to be transmitted via Web-server using HTTPS protocol, then perform the following settings in the HTTPS-server group:
The parameters of connecting Clients to the Web-server are now set.