To set up the LPR channel do the following:

1. activate the program module, used for identifying the plates (Auto-Uragan, Arena, Carmen-auto, CARMEN-parking, ARH-Containers, VIT, Carmen-Carriages or IntLab-Carriages) by creating the corresponding object on the basis of LPR channel object;

2. select cameras for operation with the LPR channel;

   This step and further operations are performed on the LPR channel settings panel, on the basis of which the program module is activated.

   In case when Arena program module is used, the parent object LPR channel should not be set up.

3. setting up the video recording parameters;
4. setting up the recording and displaying video frames with a vehicle;
5. selecting the LPR country-emitter (for Auto-Uragan and VIT modules);
6. selecting the plates identifying mode (rapid/slow) (only for CARMEN-Auto module );
7. setting up the result of identifying the vehicle plates (only for Auto-Uragan and VIT modules);
8. setting up the joint operation of LPR channel and the Intellect PC Traffic detector;
9. setting up the databases;
10. setting up the results filtering;
11. setting up the joint operation of LPR channel and Radar program module;
12. setting up the LPR search area border;
13. selecting the vehicle direction for identifying the plates (only for Auto-Uragan and VIT modules);
14. setting up the LPR channel (only for Auto-Uragan and VIT modules);
15. setting up the frames processing.