You can configure HikVision anti pass-back via the HikVision reader's setup panel (see ). As an example of the HikVision anti pass-back configuration, let's consider a HikVision reader connected to a Hikvision 26X  controller.

To configure the HikVision anti pass-back, do the following:

1. Go to the HikVision reader setup panel.
   
   
2. In the Card reader pane ( 1 ), check the boxes for the readers where the anti pass-back monitoring is required.
3. Click the Apply (2) button to save your settings.

The HikVision anti pass-back is now configured.