The last identified vehicle data is displayed in the Last event group of the Online monitor window.

If there is an event selected in the identified vehicles protocol or in the alarms protocol, the data about this event will be displayed in the Last event group (see Viewing the protocol of the identified vehicles, Viewing the alarms protocol).

Viewing the data about the last identified vehicle is performed in the following way:

  1. The vehicle video frame with a caption is displayed in the filed (1).

  2. The identified LP number and the LP image is displayed in the field (2).

    If the LP number hasn't been recognized, Unidentified message will be displayed in the field.


  3. Depending on the available data, the following information can be displayed in the field (3):
    1. In the Recognizer field, the name of the LP recognizer is displayed (the name of the corresponding LPR channel object).

    2. In the Country field, the country to which belongs the identified LP number is displayed.

      The country is displayed only when the Uragan or CARMEN-Auto modules are used for recognition.


    3. In the Recognition time field, the date and time of receiving the vehicle information is displayed.

    4. In the Speed field, the vehicle speed is displayed.

      In case the Uragan or CARMEN-Auto modules are used for identification, and the Radar module is not connected, zero speed value is displayed.


      Depending on the Vehicle Tracer settings, the speed is displayed in km/h or mi/h (see Auto-Intellect software package: Administrator's guide).


    5. In the Allowed speed field, the speed limit allowed on this part of the road is displayed.
    6. In the Validity field, the identification validity rate is displayed in percent.
    7. In the Direction field, the vehicle's direction is displayed (Towards the camera or Off the camera).
    8. In the Regional code field, the regional code of the recognized LP is displayed.
    9. In the Camera field, the name of the video camera which captured the vehicle, is displayed.
    10. In the Address field, the camera location address is displayed.
    11. In the Identificator (№) field, the camera ID number is displayed.
    12. in the Sertificate (№) field, the sertificate number is displayed.

    13. In the Calibration field, the clibration expiration date is displayed.

Viewing the data about the last identified vehicle is complete.

In case an alarm was registered for a vehicle, the reason of alarm is also displayed in the Last event group.


The data about any event selected in the identified vehicles protocol or in the alarm protocol can be viewed in the same way (see Viewing the identified vehicles protocol, Viewing the alarms protocol).