To view the analytics data of the Face recognition and search interface module click the Analytics button.

Analytics data are formed by the Visitor counting channel. If this channel was not activated at system setup, the Analytics button is disabled (see Activation of the recognition module in the Face Intellect software).

To configure the displaying of the analytics data, do the following:

  1.  In the Period from and to fields (1) specify the time period for which the analytics data is to be displayed.
  2. From the Show faces drop-down list select faces which are to be displayed: recognized, unrecognized or all (2).
  3. In the Accesses (min) and Accesses (max) fields spacify the values corresponding to minimum and maximum number of person passes (3).
  4. In the Similarity, % field (4) specify similarity percent between the captured face and the reference image. If this value is exceeded, the face will be considered as recognized.
  5. Click the Filters button (5) to view the analytics by cameras: 
    1. In the Camera drop-down list (1), select the filter to display the cameras in the field (2).
    2. In the Cameras field (2), set the checkboxes for the cameras which analytics should be displayed.
    3. Click OK (3) to save the filter. 
  6. Click the Refresh button (6) to refresh the analytics.


  7. If a large number of unique faces is stored in the database, then refreshing the analytics may take a long time. If the Operation has timed out error occurs while the analytics is being refreshed, then it is necessary to increase the value of the AnalitycTimeout parameter in the face_client.run.config configuration file (for details, see the XML-file parameters reference guide).


  8. Click the  button (7) to export the displayed analytics to the report file.

In the section (8) the general analytics data about the captured faces is displayed.

In the diagram (9) the horizontal axis shows the total number of passes; the vertical axis shows the age of the captured faces. 

In the table (10) in the Image column the unique faces are displayed. Their quantity is equal to the Unique faces value shown in the section (8).

In the area (11), the "doubles" of the faces are displayed. The sum of the unique faces and their doubles equals to the Faces processed value shown in section (8).