The system settings of the Virdi Terminal are set up as follows:

1. From the Security Level 1:1 (Verify) drop-down list (1), select the verification quality level from 1 to 9 if only one type of authentication is used. The default value is 4.
2. From the Security Level 1:N (Identify) drop-down list (2), select the authentication quality level from 1 to 9 if several authentication types are used. The default value is 5.

3. From the Input ID Length drop-down list (2), select the user ID length: from 4 to 8 symbols.

   To ensure the terminal operation with ACFA-Intellect, it is necessary to select the 8 value. Also, the Input ID Length should be set to 8 in the terminal itself.

   
   

4. Set the Automatic Enter key check box (4) to enable the automatic key entry from the terminal keyboard (F1-F4 buttons).
5. From the Sound volume drop-down list (5), select the terminal speaker volume level: from 0 to 20.
6. From the Authentication mode drop-down list (6), select the mode of authentication and terminal operation:
   • Server / Terminal - the decisions are made by the Server, and if it is not available, then by the terminal.
   • Terminal / Server - the decisions are made by the terminal, and if it is not available, then by the Server.
   • Server - the decisions are made by the Server.
   • Terminal - the decisions are made by the terminal.

   • Offline mode - the offline mode of the terminal.

     In the offline mode, the terminal cannot be managed from the ACFA-Intellect Server.

     
     

7. From the Application mode drop-down list (7), select the terminal operating mode:

   • Access control - access point mode.

     To ensure the terminal operation with ACFA-Intellect, it is necessary to select the Access control operation mode.

     
     

   • Time/Attendance - working time tracking mode.
   • Drinking Water - breathalizers compatibility mode.
8. From the Antipassback drop-down list (8), select the double-entry control mode:
   • Not use - not used.
   • Access when disconnected - allow entry if the connection with the Server is lost.
   • Prohibit when disconnected - prohibit entry if the connection with the Server is lost.
9. From the Input ID type drop-down list (9), select the type of user identifiers:
   • UserID type - custom user identifiers.
   • UniqueID - unique user identifiers specified in the terminal.
10. From the Access mode drop-down list (10), select the access mode provided by the terminal if there is no keyboard for entering numbers on the terminal:
    • No restrictions - no restrictions.
    • Only fingers and password - only fingerprints and password.
11. Click the Apply button (11) to apply the settings.

The operation settings of the Virdi Terminal are set up