The settings panel of the SIP-device object is shown in the pictures below.
Table describes the parameters of the SIP-device settings panel.
№ | Parameter | Method for setting the parameter value | Description | Presented as | Default value | Range of values |
1 | The Identification number field | Automatically | Shows the identification number of the SIP-device object in the system. | Sequence of numbers | - | Depends on the number of the SIP-device objects in the system. |
2 | The Name field | Enter the value in the field | Assigns a name to the SIP-device object in the system. | Latin, Cyrillic letters and service characters | SIP-device | A line representing a sequence of any symbols (letters, digits, service characters apart from > and < symbols), not case-sensitive. Number of symbols – from 1 to 60. |
3 | The Disable checkbox | Is set with a checkbox | Shows the status (enabled or disabled) of the SIP-device object in the system. | Boolean type | - | Yes – the SIP-device object is disabled and is not in use. No – the SIP-device object is enabled and is in use. |
4 | The SIP-terminal dropdown list | Is selected in the list | Assigns the parent SIP-terminal object for the SIP-device object. | Name of the SIP-terminal objects registered in the system. | Name of the parent SIP-terminal object | Depends on the number of the SIP-terminal objects in the system. |
| 5 | The Device type drop-down list | Is selected in the list | Sets the icon type to represent the device on the Map. | Names of the available icon types | - | SIP client — the SIP-device acts as a client, it can be connected to any SIP-server SIP server — the SIP-device acts as a server, any SIP-clients can be connected to it Peer-to-peer terminal type is not supported at the present moment. |
The Connection settins group | ||||||
| 6 | The User ID field | Enter the value in the field | Sets the SIP-device identification number, i.e. the number to call it. | Integer | >=0 | |
| 7 | The IP address field | Enter the value in the field | For SIP-server terminal type only Sets the SIP-device IP address. | IP address | 1.0.0.0 - 255.255.255.255 | |
| 8 | The Password field | Enter the value in the field | For SIP-server terminal type only Sets the password specified on the SIP-device. | Latin, Cyrillic letters and service characters | A line representing a sequence of any symbols | |
| 9 | The State field | Automatically | For SIP-server terminal type only Displays the SIP device state | - | - | - |
| The Video/Audio tab (for SIP-server terminal type only) | ||||||
| 10 | The Video switch | Set the switch to the required position | Sets the video camera used for calls | Supported options of camera usage | Off | Off — the video is not used during the call. SIP camera — a SIP-device camera connected via the SIP protocol is used. Other — any other camera from the Intellect hardware tree selected from the Camera drop-down list is used. |
| 11 | The Camera drop-down list | Is selected in the list | Sets any video camera used for calls | Name of the Camera objects registered in the system. | - | Depends on the number of the Camers objects in the system. |
| 12 | The Audio switch | Set the switch to the required position | Sets the microphone used for calls | Supported options of audio usage | Off | Off — the audio is not used during the call. On — the microphone of the SIP-device is used. |
| 13 | The Microphone field | Automatically | Displays the name of the Microphone object corresponding to the SIP device | - | - | - |
| The Relay tab (for SIP-server terminal type only) | ||||||
| 14 | The DTMF type drop-down list | Is selected in the list | Sets the type of the tone DTMF command | Supported signal type | in_bound | in_band – the signal is transmitted as normal sound in an audio stream. rtp_nte – signals are transmitted via RTP separately from the voice stream. sip_info – signals are transmitted in the SIP INFO message. sip_notify – signals are transmitted in the SIP NOTIFY message. |
| 15 | The Signal duration, ms field | Enter the value in the field | Sets the time period in milliseconds during which the command is to be sent. | Integer | >0 | |
| 16 | The Name field | Enter the value in the field | Sets the name of the command displayed on the SIP panel | Latin, Cyrillic letters and service characters | A line representing a sequence of any symbols | |
| 17 | The Code field | Enter the value in the field | Sets the unique command code | Integer | >0 | |