All ATM Intellect components (ATM-Intellect Workstation, ATM-Intellect Workstation TC and ATM-Intellect Pro) can operate in distributed architecture of the digital video surveillance system. In this case all of these objects shall be configured locally, not remotely.

Objects creation in the hardware tree is performed as follows:

  1. Go to the Hardware tab of the System settings dialog box (1).
  2. Create the IIDK Interface object (2). Set the ID number of the IIDK Interface object (3).
  3. Then create the ATM-Intellect Workstation object on the basis of the Computer object. On its setting panel, in the IIDK interface field enter the identification number of the IIDK interface object created on step 2.
  4. Create Surveillance object objects corresponding to the connected surveillance objects. When you create these objects specify the same ID as in the ID field on the settings panel of the corresponding Surveillance object object created under the ATM-Intellect Pro object.

The ID and Name fields must not contain underscores (_) or backslashes (\), the ID field is limited to 9 characters and must not contain spaces.

The address of the ATM can be specified as the object name.

Objects creation is completed.