The FS80 control reader is to be used only with the BioSmart integration module (see BioSmart Integration Module Configuration and Operation Manual).

Adding biometric parameters (fingerprints) of users from the Access Manager using the BioSmart FS80 biometric control reader is carried out as follows:

  1. Display the Access Manager window (see Starting and stopping the Access Manager module).
  2. Go to user editing (see Going to user editing).
  3. Right-click the user's photo and select Extensions -> (Suprema/Biosmart) FS80 control reader.
  4. In the Operations on biometrics window, press the Add fingerprints button.

    The Reading biometric data window will open.
  5. Put finger on reader and hold until the fingerprint appears in the window.
  6. Click the Apply button and repeat the procedure with the same finger.
  7. If the procedure was carried out properly, and the fingerprints match, the Biometric data is valid message will be displayed.
  8. Click Ready to save the fingerprint.
  9. If required, add new fingerprints or delete the existing ones.
  10. Click Ready and then save the user parameters.