The VideoIntellect prohibited zone motion detection is configured as follows:

1. On the Select area tab, do the following:
   
   1. To capture a frame of a video image, click the Stop video button (1).
   2. Set one or more zones in which the motion will be detected (2).
   3. All set zones are displayed in the Detection zones area (3). If necessary, you can change the name of the zone or delete the zone.
   4. Click the Object size button (4) and use the yellow line to set the approximate size of the human head.
   5. Click the Apply configuration changes button (5).
2. On the Prohibited zone motion detection tab, configure the detection tool parameters:
    
   1. In the Sensitivity (0-1) field (1), enter the detection tool sensitivity to detect moving objects in the analyzed area. The higher the sensitivity, the less visible a moving object can be detected.
   2. In the Reaction time (s, 0-300) field (2), enter the time in seconds after which the detection tool will indicate the occurrence of the "Prohibited zone motion detection" alarm situation. The countdown starts from the moment the object enters the detection zone. If there is no movement in the prohibited zone after the reaction time has expired, the time counting stops, and the time counter is set to zero.
   3. In the Minimum number of people (0-20) field (3), enter the minimum number of people at which the detection tool starts recording an event. If the zone occupancy with people continues to be higher than the specified threshold time (Reaction time parameter), then the detection tool indicates an alarm situation.
3. On the Parameters tab, the area (1) displays the current detection configuration. This configuration can be copied to any text file. To upload a configuration from a file, click the Load configuration from file button (2).
   
   Description of some configuration parameters:
   1. sensitivity—Sensitivity.
   2. sizeobject—The size of the human head.
   3. reactiontime—Reaction time.
   4. minNumberOfObjects—Minimum number of people.
4. Click the OK button to complete the detection configuration.

The VideoIntellect prohibited zone motion detection is now configured.