The Sweethearting at checkout detection module is configured on the settings panel of the Sweethearting at checkout detection object created under the Camera object on the Hardware tab of the System settings dialog box.

The Sweethearting at checkout detection module is configured as follows:

1. Go to the settings panel of the Sweethearting at checkout detection module.
2. Click the Settings button (1).
   
   The Detection settings window will open.
   
   1. Specify the area of interest of the detection:
      1. Go to the Select area tab (1).
      2. Click Stop video to capture the video image (2).
      3. Click Area of interest (3).

      4. Specify the area of interest in the captured video image to be analyzed (4). The selected area must comply with Camera and camera settings requirements for the Sweethearting detection module .

         Only one area can be specified. If the second area is specified, then the first area will be deleted. To remove a selected area, click the  button next to the Area of interest button.

         
         

   2. Go to the Parameters (5) tab and perform the following actions:
      

   3. Specify the detection sensitivity in the range from 0.0 to 1.0 in the Detection sensitivity (0.0 - 1.0) parameter (6).

      The value is found experimentally.

      
      

   4. Click OK (7) to save changes and return to the settings panel of the Sweethearting at checkout detection object.

      To return to the control panel of the Sweethearting at checkout detection without saving changes, click Cancel.

      
      

3. Select the neural network file with the tracking model.
4. In the Device drop-down list (4) select the device where the neural network will operate.
5. Click the Apply button (5).

The Sweethearting at checkout detection module is now configured.