The push notifications are configured in the Pushes section as follows:

1. To enable the push notifications receiving, perform the following actions in the direct order: 

   1. Connect to the required Server (to Axxon Next - only via AxxonNet, to Intellect - directly, see Connection and Server operations in AxxonNet client on Android OS).  

      To receive push notifications from the Axxon Next Server, do the following: Connect this Server to AxxonNet (see AxxonNet Setup and Operation). To send push notifications automatically, it is necessary to configure the corresponding macro to initiate an alarm event on the detector (see Trigger an alarm). Manual alarm event initiation (see Manual Initiation) also initiates sending push notifications to mobile devices. To receive push notifications from the Intellect Server, it is necessary to activate and configure receiving push notifications in Intellect (see Configuring the Events filter for the Web-server 2.0 module).

      
      

   2. Subscribe to push notifications on the Status tab (see The Status tab in AxxonNet client on Android OS).

   3. Make sure the Android device has access to AxxonNet notifications.
      

2. In the Notifications period parameter (1), select the frequency of receiving notifications. Notifications will not come more often than specified in the period:

   • No limit;

   • 5 seconds;

   • 10 seconds;

   • 1 minute.

   After changing the notifications period, it is necessary to restart the application.

   
   

3. Set the Show images checkbox (2) to display the images in push notifications.

4. Set the Local notifications checkbox (3) if it is necessary to enable direct notifications (it is not recommended to enable this parameter, for details see Configuring the direct notifications in AxxonNet client on Android OS).