In a Failover system, the ANRP license is not automatically transferred to a new node (see Configuring Failover VMS).

To enable the detection tool, you need to manually activate the license on the PC where the new node is launched.

On order to receive the software license key for the ANPR, proceed as follows:

  1. Download the utilities by the links below:
    1. haspdinst_EOAWT.exe
    2. RUS_EOAWT.exe

  2. In the Windows command line, execute the following two commands one after another to install the protection key driver:

    haspdinst_EOAWT.exe -fr -purge
haspdinst_EOAWT.exe -i -fi -fss


    Make sure that the current directory in the command line is similar to the one where the haspdinst_EOAWT.exe file is located.


  3. Wait for the installation completion.
  4. Click OK in the dialog box to confirm installation is completed.
  5. Check installation correctness by opening the http://127.0.0.1:1947/_int_/ACC_help_index.html page in the web browser.

  6. Run the hasp_RUS.exe file to start the Remote Update System. The RUS dialog box opens.

    The RUS abbreviation stands for Remote Update System.

  7. Set the Collect information from this computer to enable: switch into the Installation of new protection key position in case if license for a "clean computer" is needed, i.e. if there is no demo license on it, or to the Update of existing protection key position, if demo license is already in use (1).
  8. Click Collect information.
  9. Save the file with .c2v extension to any folder.
  10. Close the hasp_RUS.exe tool.
  11. Hand the .c2v file to your AxxonSoft manager.
  12. Receive the license file with .v2c extension from your AxxonSoft manager.
  13. Run the hasp_RUS.exe tool and go to the Apply License File tab (1).
  14. Specify location of the license file in the Update File field using the ... button (2).
  15. Click Apply Update (3).

Receiving the software license key for the ANPR is now completed.