Setting up common parameters for pose detection tools

To detect a lying pose, you have to configure scene perspective first. 

Please follow the steps below:

  1. Select a detection tool, and click  in the preview window.

  2. Set the size of the same human figure in different areas of FOV. To create a leveling rod, left-click on the video image to add two anchor points. You should set no less than three leveling rods. The leveling rod height must correspond to a human figure placed in the same point of the scene. You can resize the rod by stretching its anchor points , or move it on screen by dragging and dropping.

    When setting up leveling rods, please make sure that the following conditions are met:

    1. all rods have different height;
    2. all rods must be based on the same plane (for example, floor);
    3. in complex scenes where detection accuracy is crucial, we recommend you to add more than 3 rods;
    4. in areas where the picture is apparently distorted, place the rods in parallel to known vertical elements (doors, bookcases, etc.).


    In portrait-oriented scenes (such as store / warehouse aisles, etc.), set the rods in triangles.

    For your convenience,  you can click the  button to freeze the video. To unfreeze, click the button once more.


    To delete a rod, click the  button.


  3. Click Apply button.