Record of video from computer monitor is performed to control operator actions. Video from computer monitor can be transmitted to the Axxon Next software package by general protocols using external programs, for example:

1. By RTSP protocol using the VLC Media Player included into the software package. 
2. By ONVIF protocol using the ScreenOnvif program which can be got in the  http://screenonvif.com/en web-site.

Example of the VLC Media Player configuring for transmitting video from computer monitor to the Axxon Next by the RTSP protocol is presented in this section. Configuring of the Axxon Next software package  to receive and record this video stream is performed by standard means as described in the RTSP 서버 구성 and Binding a camera to an archive sections.

Configuring the VLC Media Player for transmitting video from computer monitor to the Axxon Next software package by the RTSP protocol is performed the following way:

1. Run the VLC Media Player.
2. Select the Open Network Stream item... in the Media menu.
   
3. In the opened window go to the Capture Device tab.
   
4. In the Capture mode drop-down list select the Desktop value.
5. Set the desired frame rate for the capture in the corresponding field.
6. In the Play list select the Stream value. As a result the Stream Output window will open.
   
7. Click the Next button.
8. In the opened window select the RTSP value in the New destination drop-down list and click Add button.
   
9. Go to the RTSP tab.
10. Specify port and path to the stream if it's required.
    
11. Click Next button.
12. Specify parameters of video transcoding and click Next button.
    
13. Click Stream button in the opened window.

After that configure receiving of the RTSP stream and its record to the archive in the Axxon Next software package – see RTSP를 통한 비디오 카메라 연결 구성 and Binding a camera to an archive sections.

Configuring of the VLC Media Player for transmitting video from computer monitor by the RTSP protocol to the Axxon Next software package is completed.