Setting up the TREZOR-BL controller is performed in the following way:

1. Go to the BL (Trezor) object settings created on the base of the Bus RS-485 (Trezor).
   

2. Specify the connected controller address for theAddress parameter (1) within the limits of 0 to 255.

   The Address with a ‘0’ value (or ‘00000000’ in binary code) is meant for executing utility functions. The controller address is set up with the eight-bit switch on the controller circuit plate.

   
   

3. Click Apply (2).

The TREZOR-BL controller setting has been finished.