In order to manage a HoneyWell WinPak entrance, go to the Map window and open the functional menu of the relevant WinPak Entrance object.
| Command | Description |
|---|---|
| De-Energize | Turns off the energy supply for the entrance input. |
| Mode: Locked | Turns on the mode when the door is completely locked. |
| Mode: Card | Turns on the mode when the card is sufficient for door access. |
| Unshunt | Disable a delay before an alarm is raised if the door is not closed after it has been unlocked. |
| Mode: Disable | Completely disables the door and its controls. |
| Energize | Turns on the energy supply for the entrance input. |
| Mode: Site Code | Turns on the mode when both card and site code entry are required for door access. |
| Mode: Unlock | Turns on the mode when the door is completely unlocked. |
| Timed pulse | Enable sending pulses in time periods to the server to notify that the door is alive. The time periods are configured in ACFA PSIM. |
| Shunt | Enable a delay before an alarm is raised if the door is not closed after it has been unlocked. |
| Mode: PIN | Turn on the mode when the PIN number is sufficient for door access. |
| Restore TimeZone | Reset the time period durimg which the door accepts the card. |
| Pulse | Enable sending pulses in time periods to the server to notify that the door is alive. The time periods are configured in HoneyWell WinPack. |
| Mode: Card or PIN | Turns on the mode when both card access and PIN are required for door access. |
| Mode: Card and PIN | Turns on the mode when either card or PIN is sufficient for door access. |