The network settings of the Hikvision controller/terminal will be illustrated by an example of the Hikvision DS-K26x series controller. You can configure the network settings of other Hikvision controllers/terminals in the similar way.

To configure the network settings of the Hikvision controller, do the following:

  1. Go to the Network tab on the settings panel of the Hikvision 26X object.
  2. In the Login and Password fields, enter the login and password to connect the Hikvision controller, respectively.
  3. In the IP, Port and MAC fields, enter the IP address, connection port and MAC address of the Hikvision controller. If you added the device using the Device search button (see Configuring the Hikvision parent object), these fields will fill in automatically. 

  4. Click the Apply button to save the network settings. As a result, an objects tree corresponding to the configuration of the Hikvision controller will be created.

    If the connection to the device is successful, the Device information blank area below the Network, Control and Others tabs will display information on this controller.