To configure the additional settings of the Hikvision reader, do the following:

1. Go to the Misc tab on the settings panel of the Hikvision 26X Reader object.
   
2. Set the Connected by RS485 checkbox if the reader is connected through the RS-485 interface.

3. Set the Control reader checkbox if it is necessary to assign the code from this reader to the employee in the Access Manager module when issuing a card.

   Make sure to select the Hikvision door to which the reader is connected on the Readers tab in the settings of the Access Manager module (see Guide for configuring and working with the Access Manager module).

   
   

4. Click the Apply button.