Configuring the Unicard zone is performed on the settings panel of the Unicard Zone object created on the basis of the Unicard object on the Hardware tab of the System settings dialog window.

To configure the Unicard zone, do the following:

  1. Go to the settings panel of the Unicard Zone object. 
  2. From the Region: drop-down list select the Region object corresponding to the zone (1).
  3. If the access point to the zone is a sluice gate, check the Sluice box (2).
  4. To enable antipassback for the zone, check the Antipassback box. (3)
  5. Click the Apply button to save changes.
  6. Repeat Steps 1-4 for all the zones.

Configuring the Unicard zones is completed.

If more than 35 zones are created and sent to controller, this event will be registered in the Event Manager.