Before you configure the RISCO FSA in ACFA PSIM, perform the following actions on the RISCO ProSYS Plus main panel:

1. Disarm all partitions and zones. This can be done with a user password (default: 1234). In order to enter the password, press *, enter the password, then press #.
2. Enter the programming menu (default password: 1111).
3. Select System (1) -> Controls -> Communication -> CS Enable -> Select Yes.
4. Select Communication (5) -> Method -> IP -> IP Config -> Obtain IP -> Select Static.
5. Panel Port -> Select 1000.
6. Panel IP -> Set the required IP.
7. Mask -> Set the required subnet mask.
8. Select Communication (5) -> Config. SW -> Security -> Access code -> Set access code.

Pre-configuring the RISCO FSA is completed.