The Texecom zone is configured as follows:

1. Go to the settings panel of the Texecom zone object, which is created on the basis of the Texecom panel object.
   
2. From the Number drop-down list (1), select the zone number. The zone number should match the physical zone number of the panel.
3. From the Zone type drop-down list (2), select the panel zone type.
4. In the Text field (3), enter a brief description of the zone that will be displayed on the panel screen.
5. Set the checkboxes for the necessary areas (4), which should be included in this zone (see Setting up the Texecom area).
6. Click Apply (5) to save the changes.

The Texecom zone is now configured.