To configure the relay output of the ROM II-16 (ROM II-8) controller go to the settings panel of the ROM 16 Relay (ROM 8 Relay) object. This object is created on the basis of the ROM II-16 (ROM II-8) object on the Hardware tab of the System settings dialog window.

To configure the relay output of the ROM II-16 (ROM II-8) controller, do the following:

1. Go to the ROM II-16 (ROM II-8) object’s settings panel.
   
2. From the Exit No: drop-down list select the number of relay output (1).
3. Click the Apply button (2).

Configuring the relay output is completed.