To configure the device connection via the SNMP protocol, do the following:

1. Go to the settings panel of the SNMP Device object that is created on the basis of the SNMP Wrapper object.
   
2. In the IP address field, specify the IP address of the device.
3. In the Port field, specify the connection port of the device.
4. From the Version drop-down list, select the version of the SNMP protocol of the connected device.
   

   You must select the version of the SNMP protocol according to the technical requirements of the connected device (see official reference documentation for the device).

   
   
   1. For the V1 and V2 versions of the protocol, in the Community field, specify the group membership password.
      

      The default Community values are public and private for read or read-write permissions, respectively.

   2. For the V3 version of the protocol, from the User drop-down list, select the required user (see Configuring users).
      
5. In the Enterprise OID field, enter the device identification number.
6. In the Search algorithm section, select:
   1. IP Enterprise OID to use the device's IP address and ID to search for the device.
   2. Enterprise OID only to use only the device's ID to search for the device.
   3. IP only to use only the device's IP address to search for the device.
7. Click the Apply button to save the changes.

Connecting a device via the SNMP protocol is complete.