Organization of a virtual access point when recognizing license plates allows you to record an access event when recognizing a license plate that is stored in the database (in the user parameters specified in the Access Manager module).

To configure a virtual access point when recognizing license plates, do the following:

1. Create the Virtual access server object on the basis of the Computer object on the Hardware tab of the System settings dialog window.
   
2. Create the AUTO access point object on the basis of the Virtual access server object.
   
3. Configure an access point:
   
4. From the Server drop-down list, select the LPR channel on the basis of which an access point must be organized.
5. From the Entrance to drop-down list, select the Region object corresponding to the area to which access is performed.
6. From the Exit from drop-down list, select the Region object corresponding to the area from which the exit is performed.
7. From the Control drop-down list, select the access granting mode:
   1. Server decides—server makes the decision to grant or deny access (this includes the use of scripts).
   2. Operator decides—operator makes the decision to grant or deny access using the Event Manager module (see Working with the Event manager module). If you select this mode, the following settings become available:
      
      
      • Timeout sets the time interval in seconds to wait for access confirmation by the operator. All other requests from the LPR channel are ignored within the specified timeout.
8. If you select the Server decides access granting mode, then from the Mode drop-down list, select the access rights check mode:
   1. Recognition only—server makes the decision to grant or deny access based only on license plate recognition.
   2. Rights checking—server makes the decision to grant or deny access after successful license plate recognition and successful verification of the access rights of the user who owns the vehicle (access level, time zones, blocking, antipassback). If you select this mode, the following settings become available:
      

      1. Check date of begin and Check expiration—sets the mode of checking the access card validity:

         • Do not check—do not check the start or expiration date of the card.

         • Do not include—do not include the start or expiration date of the card in the check.

         • Include—include the start or expiration date of the card in the check.

      2. AntiPassBack—select the antipassback control mode from the drop-down list:
         • Do not check—antipassback control is disabled.
         • Strict—antipassback control is enabled, that is, when a person accesses through one access point more that once, an access event isn't generated and access is denied.
         • Timed—antipassback control is enabled for the time period specified in the APB Timeout field.
           
           • APB Timeout—sets the time interval in HH:MM:SS format, during which the antipassback control is enabled.
         • Soft—a person can access, but a note is made in the access event that a person accessed with a violation (repeated access).
9. Click the Apply button to save the changes.

Organization of a virtual access point when recognizing license plates is complete.