To configure the connection of the UniPos FSA to the ACFA Intellect software package, do the following:

  1. Create the UniPos 7002 FSA object on the basis of the Computer object on the Hardware tap of the System settings dialog window.
  2. Set the connection parameters on settings panel of the UniPos 7002 FSA object:
    1. In the COM-port: field specify the port of connection the UniPos FSA to the ACFA Intellect Server (1).
    2. From the Baudrate drop-down list select the data exchange rate between the Intellect Server and the UniPos 7002 control panel. This parameter is expressed in bits per second (2).
    3. In the RS-address field enter the hardware address of the device (3).
    4. Click Apply to save changes (4).

Configuring the connection of the UniPos 7002 FSA to the ACFA Intellect software package is completed.