Organizing of virtual access point while face recognition allows fixing the access (ACCESS_IN event) while recognition a face which is stored in the database (see the Face-Intellect software package. Administrator’s Guide in AxxonSoft documentation repository).

To organize the virtual access point while face recognition, do the following:

1. Create the Virtual access server object on the basis of the Computer object in the Hardware tab of the System settings dialog window.
   
2. Create the FACE access point object on the basis of the Virtual access server object.
   
3. Configure the FACE access point:
   
4. Select camera which performs the face recognition. Camera must work with the face recognition server (1).
5. Select the face recognition server on the basis of which the access point is to be organized (2).
6. From the Entrance to drop-down list select the Region object corresponding to the area in which access is performed (3).
7. From the Exit from drop-down list select the Region object corresponding to the area from which the exit is performed (4).
8. From the Control drop-down list (5) select the access granting mode:
   • Server decides - the server makes the decision for access granting or refusal (this includes the use of a script).
   • Operator decides - the operator makes the decision for access granting or refusal using the Event Manager module (see Working with the Event manager module). If this mode is selected, the following settings become available:
     
     
     • Timeout - sets the time interval in seconds to wait for access confirmation by the operator. All the other requests from the Face recognition server will be ignored within the specified timeout.
9. If the Server decides access granting mode was selected, then from the Mode drop-down list (6) select the access rights checking mode:
   • Recognition only - the server makes the access granting decision based only on face recognition.
   • Rights checking - the server makes the access granting decision after successful face recognition and successful verification of user access rights (access level, time zones, blocking, antipassback). If this mode is selected, the following settings become available:
     

     • Check date of begin and Check expiration - sets the mode of checking the access card validity:

       • Do not check – do not check the start or expiration date of the card.

       • Do not include – do not include the start or expiration date of the card in the check.

       • Include – include the start or expiration date of the card in the check.

     • Check blocking – set the checkbox to check if the user is blocked.

     • Check AntiPassBack – set the checkbox to control double pass.

   • Temperature monitoring - if it is required to only monitor the face temperature (see Face temperature monitoring and control).
   • Temperature control - if it is required to only control the face temperature threshold exceeding (see Face temperature monitoring and control). If this mode is selected, the following settings become available:
     
     
     • Lock user on temp. alarm - set the checkbox if it is necessary to automatically block the user when the temperature is exceeded (the User blocked - Yes parameter will be set in the Access Manager module). If the joint operation with the ACS and dynamics are enabled, then such a user will be automatically removed from the controller and therefore will be denied access.
10. Click Apply button (7) to save changes.

Organizing of virtual access point while face recognition is performed.