When you assign a template, a detection tool is created, which increases the load on the Server. Please consider the CPU load by the detection tool before assigning the template.

Using templates, you can apply the same parameters to different cameras. There are 9 default templates:

  1. VCA detector (main stream), VCA detector (secondary stream) – a motion detection tool is created on a high or low quality video stream, the video will be recorded to the archive if the detector triggers.
  2. People counter detector – a visitor counting detection tool is created on a low quality video stream. 
  3. Audience counter (secondary stream) – a queue detection tool is created on a low quality video stream. 
  4. LPR detector – a license plate recognition detection tool is created for the camera.
  5. Constant record – the video will be constantly recorded to the archive.
  6. Face detector – a face detection tool is created for the camera, the video will be recorded to the archive if the detector triggers.
  7. Moment Quest (main stream), Moment Quest (secondary stream) – an object tracker and a Motion in area detection tool are created on a high or low quality video stream, the video will be recorded to the archive if the detector triggers.
  8. Hikvision LPR embedded detector – a built-in license plate recognition detection tool is created for the Hikvision cameras.
  9. Mobotix embedded detector – a built-in motion detection tool is created for the Mobotix cameras, the video will be recorded to the archive if the detector triggers.

Apply the template to the camera as follows:

  1. On the Cameras tab, click the  button in the upper left corner of the camera.
  2. Click the  button
  3. Select the template and click  the button.

The template is applied to the camera.