The Virdi output is configured as follows:

1. Go to the settings panel of the Virdi Output object that is created on the basis of the Virdi ACU object.
   
2. From the PGM number drop-down list (1), select the output number from 1 to 8.
3. From the PGM type drop-down list (2), select the output type:
   • Unused - not used.
   • Matching success - is triggered after successful authorization of a user.
   • Matching failed - is triggered after an unsuccessful authorization of a user.
   • Scheduled output - works according to the assigned schedule.
   • Alarm output - is triggered when an alarm is activated.
   • System troubles - is triggered when a problem occurs in the system, for example, a problem with the battery, a problem with the reader, etc.
   • Arm/disarm status - is triggered when a region becomes armed/disarmed.
   • Fire alarm - is triggered when a fire alarm is activated.
   • Silent alarm - is triggered when a silent alarm is activated.
   • Open too long - is triggered when the door is open for too long.
   • Door forced - is triggered when the door is held by force.
4. In the Param (dep. on type) drop-down list (3):
   • if the output type Matching success or Matching failed is selected, then select the door number that will be opened when the corresponding output is triggered: from 1 to 4.
   • if the output type Alarm output, Fire alarm, or Silent alarm is selected, then select the section number in which the alarm will be triggered when the corresponding output is triggered: from 1 to 4.
   • if the output type Scheduled output is selected, then select the schedule number according to which the corresponding output will operate: from 0 to 255.
5. From the Activation time drop-down list (4), select the time in seconds within which the output will be activated: from 0 to 255.
6. Set the Inverted output check box (5) if it is necessary to invert the output.
7. Click the Apply button (6) to apply the settings.

The Virdi output is now configured.