You can set up the connection to the Hikvision ACS via the Hikvision Root object configuration panel. This object is created under a parent Computer object via the Settings dialog box on the Hardware tab.

How to configure the Hikvision ACS connection:

1. Go to the Hikvision Root object configuration panel.
   
2. Check the ACS Dynamic (1) box to enable automatic synchronization of any changes in card users' base, access rules and/or time zones with relevant controllers.

3. Click the Device Search button (2) button to start searching for connected controllers. As the result of the search, Hikvision controller objects corresponding to each discovered device are automatically created in the object tree.

   Download the SADP tool from the manufacturer's web site and install it to make sure all connected controllers could de discovered.

   
   

4. Click the Apply (3) button.

The Hikvision ACS connection is now configured.