The configuration of the Hikvision controller will be illustrated by an example of the Hikvision 26X controller. The configuration of other Hikvision controllers is similar.

To configure a Hikvision controller, do the following:

  1. Go to the Control tab (1) on the Hikvision 26X object configuration panel.
  2. Press the Set Time button (2) to set the controller's on-board clock to the current time of your server.
  3. Press the Get Time button (3) to get the controller's on-board clock value.
  4. Press the Update Device Info button (4) to update the controller data in the Device information pane.
  5. Click the Read Configuration button (5) to read the controller configuration data.

  6. Press the Write Configuration button (6) to write the current configuration data into the controller. The user photos assigned using the Access Manager module (see Assigning a photograph to a user in the Access Manager software module) are also written to the access control terminals. These photos are used as face templates (see Adding the Hikvision face template).

    Write the current configuration data into the controller after each change made to configuration in ACFA PSIM.


  7. Click Update Access Data button (7) to update access levels data stored in the controller.
  8. Click the Apply button (8) to save your settings.

The Hikvision controller is now configured.