The LPR channel can operate together with the main motion detector of Axxon PSIM. This helps decrease the CPU load.

This setting is set only when using the following program modules: AUTO-Uragan, CARMEN-Auto, ARH-Railway, VIT, or LPR IntelliVision.

If the LPR channel works in conjunction with the Axxon PSIM main motion detector, it scans the video image for LP numbers when the motion detector is in an alarmed state, i.e. some motion is detected in the camera FOV.

When the main motion detector is not alarmed, the LPR channel does not scan the video image to find and recognize the LP numbers.

If the joint operation is disabled, the LRP channel scans each incoming frame.

To enable joint operation of the LPR channel and the Axxon PSIM motion detector, do the following:

  1. Go to the LPR channel object settings panel, corresponding to the activated module (see Activating the software module used for identifying the plates).

  2. Check the Enable on motion detection trigger checkbox (1).
  3. Click the Apply button (2).

The joint operation of the LPR channel and the Axxon PSIM motion detector is now completed.