Requirements for the operation of the Vehicle recognition XR are given in the table:
Camera
Minimum resolution is 640*480, recommended resolution is 1280x720px
Minimum frame rate is 15 FPS, recommended frame rate is 25–30 FPS
Autofocus and zoom functions are desirable (for making small adjustments after the detector is configured)
Correct operation of the detector isn't guaranteed if you use frames that were masked before they got into Axxon One by an IP camera or similar methods.
Lighting
Lighting in the scene is at least 50 lux. In conditions of insufficient or excessive lighting (night or light-striking), stable operation of the analytics isn't guaranteed
No abrupt changes in lighting
Scene and camera angle
To achieve the highest accuracy, set up the camera to capture only one lane of traffic, preferably the one closest to the camera (dual lanes are possible if the camera is positioned between two lanes)
Maximum horizontal tilt angle of the camera must be no more than 15º. This is the angle from the road to the capture point
Working distance from the camera to the capture point must be:
15–20 meters for urban conditions and low speed;
20–30 meters for higher speed measurements
Camera installation height is 4–6 meters above the ground
Angle formed by the bottom line of a license plate and the horizon line must be between 0º and 20º
Camera must not be installed near road bends, speed bumps, road junctions, traffic lights or roundabouts, as vehicles are likely to accelerate or decelerate at these locations. Detection area must not be on a curve in the road