General information about working with the DEA Security FUSION P2P integration module

The DEA FUSION P2P integration module is managed through the Map, Equipment Board, and Event Board interface objects, along with Programming rules.

For the information on configuring these interface objects, see Configuring the interactive map, Configuring an Equipment Board and Configuring an Event Board.

For the information on working with these interface objects, see Working with the interactive map, Working with Equipment Board and Working with Event Boards.

For the information on configuring Programming rules, see Creating and configuring macros and counters.

Managing the DEA FUSION P2P objects

States

States available for various DEA FUSION P2P objects are listed in the tables below.

1. Line object.
   

   Icon	State
   	Alarm
   	Breaking through
   	Climbing
   	Continuous impact
   	Wire cut
   	Memory fail
   	Sporadic cut
   	Disabled
   	Fail
   	Invalid
   	Link lost
   	Activated
   	Deactivated
   	Standby
   	Normal
   	Prealarm
   	Tamper
   	Tamper memory
   	Unknown

2. Controller.

   Icon	State
   	Disabled
   	Error
   	Link lost
   	Link set
   	Unknown

3. Link.
   

   Icon	State
   	Lost
   	Set

4. Input, Led, Output, Rooster, Button, Bulb, Contact.
   

   Name	Lost	Off	On
   Input
   Output
   Rooster
   Button
   Bulb
   Contact
   Led

Commands

Commands accessible via Axxon One interface for various DEA FUSION P2P objects are listed below.

Managing the Input object visualisation

In order to change visualisation settings of the Input object, do the following:

1. Switch to the layout editing mode (see Switching to layout editing mode).
2. On the map, left-click the Input object.
3. Select the required visualisation type from the list.