Purpose of the document

The Guide for configuring and working with the Zk PUSH Server integration module is a reference and information manual and is intended for configuration specialists and operators of the Zk PUSH Server integration module. This module is a part of the Access Control System implemented on the basis of ACFA.

The Guide has the following information:

  1. General information about the Zk PUSH Server integration module.
  2. Adding the Zk PUSH Server integration module
  3. Configuring the Zk PUSH Server integration module.
  4. Working with the Zk PUSH Server integration module.

General information about the Zk PUSH Server integration module

The Zk PUSH Server integration module is a part of the ACS implemented on the basis of ACFA and is used to control the hardware of the ZKTeco system.

For detailed information about Zk PUSH Server ACS, refer to the official reference documentation for this system (manufacturer ZKTeco).

For the correct operation, you must install ZK Teco SDK.

Before configuring the Zk PUSH Server integration module, you must do the following:

  1. Install the Zk PUSH Server hardware on the protected facility (see the official ZKTeco reference documentation).
  2. Connect the Zk PUSH Server hardware to the Server (see the official ZKTeco reference documentation).