New integrations and supported devices

AxACFA integrations

All integrations made via the AxACFA mechanism are universally licensed. This means that licenses are purchased for the system hardware as a whole, not for specific models/vendors. Thus, all ACS integrations are licensed per one ACS reader, all FSA integrations are licensed per one addressable sensor or loop (for addressless systems), and all PID integrations are licensed per an extended sensor (cable or alarm notification device).

New AxACFA integrations

• Hartmann Odyssey, ACS. Hartmann Odyssey software version 3.1.0.73 is integrated. The main functionality is event level. You receive access events with information about the user who accessed. Control of access points (door open temporarily) is implemented
• Honeywell, FSA. VISTA-128BPT panel is integrated. The main functionality is receiving alarm events from monitored zones united into partitions. Control of zones (enable alarm bypass mode), control of partitions (arm, disarm, several arming modes are supported) are implemented
• Peridect+, PID. CUP+, LCP+, DSP+, LIP+ devices of all versions are integrated. The main functionality is receiving and processing alarm events from detectors united into groups and segments. Control of detectors, groups, and segments (disarm and arm, alarm processing) is implemented

New features and improvements

Service modules

• Access Manager  
  • Improved settings of user cards, categories of department types, highlight of fields;
  • Added masking for an additional field with the type "Unique text with validation" (UT);
  • Added sorting for the list of readers and cameras in the settings;
  • Made general improvements.
• Event Manager
  • Made general improvements.
• Virtual Access Server  
  • License plates in the AUTO virtual access point are now recognized with one camera available;
  • Removed the Check blocking parameter for the FACE access point and FACE verificator objects;
  • Added the AntiPassBack and APB Timeout parameters for the FACE access point and AUTO access point to control antipassback;
  • Added the ability to enable or disable an object and transfer it to another server;
  • Added alphabetical sorting for the event and reaction selection list in the FACE verificator object.
• Emulator ACFA  
  • Added new object types;
  • Fixed problems related to control;
  • Changed events about command execution results.

Integration modules

• BacNet Wrapper: added the ability to create the BACnet server manually and download its child objects if the IP address and ID of the BACnet server are known
• MORPHO
  • Added an event about exceeding the device memory limit when you write users. The event displays information about the number of users who have exceeded the limit;
  • Added an event that a user isn’t written due to the absence of fingerprints. The event displays the full name and ID of the user;
  • Removed the field with the number of registered users;
  • Two transaction logging formats (transaction_log.format) are supported: a basic format and a format with an identifier for each transaction packet.
• Forteza
  • Fixed the display of status when connection is lost for one-position sensors and their zones;
  • fixed control (arming) for one-position sensor.
• HikVision  
  • Added the ability to read leading zeros when writing cards;
  • Stabilized module operation when you have a large number of terminals;
  • Added an event with the number of fingerprints written to the controller when users are written up to capacity.
• Suprema 2  
  • Stabilized writing of users if there are duplicate cards;
  • Added a new Suprema 2 Scheduled Lock/Unlock Zone object to the object tree that allows you to link two time zones with a list of up to 32 doors.
• SIGUR: decimal card format is supported 
• Modbus: corrected localization
• Risco: updated icons
• Unipos 7000M: fixed errors related to configuration download.
• Virdi (UNIS): fixed errors in card reading and transmission of access events
• ApolloSDK: fixed an error of blocking a card from the Access Manager
• Kaba exos 9300  
  • Restored the synchronization of users with vehicle license plates;
  • Changed the name of the database.
• Optex: corrected localization
• Paradox: corrected localization
• Texecom: stabilized connection to the module

AxACFA integrations

• SALTO: verified the operation with the new version of ProAccessSpace 6.10.3.1 software
• OPC UA  
  • Added quality for tags:
    • Good: indicates that the data or operation is successful and the data is valid;
    • Bad: indicates that there is a problem with the data or operation. Data can be unavailable or unreliable;
    • Uncertain: indicates that the data can be unreliable or its quality cannot be guaranteed.
  • Added parameters to events: name of the parent object; name of the node from which the event was received;
  • Now you can create duplicate child nodes below different parent objects;
  • Added the Use source time parameter to the settings panel of the parent object. This parameter allows you to use the time of the OPC server;
  • Improved the algorithm of OPC server polling;
  • Added the SamplingInterval (ms) parameter for the variable, numeric variable, and group of items. This parameter ensures the stability of event reception.
• SNMP Wrapper  
  • Made general improvements;
  • Fixed an error related to changing the value of the polling interval for OID.
• ZKTeco PUSH  
  • Added events that indicate limitations on the amount of biometric data that you can add to the device;
  • Added new types of biometric data supported by devices, besides face and fingerprints. The new type of biometric data is written only to the intermediate database of the device; connection with the Access Manager module isn’t implemented;
  • Changed the control commands for access points: the door can be opened for a certain or unlimited period of time, the door can be closed, or an alarm can be handled;
  • Changed the door states according to the commands.
• Axacfa: BacNet Wrapper: stabilized module operation 
• Bosch FaceID
  • Added a mechanism for writing the "Always" access levels to the Bosch Face terminal during hardware initialization;
  • Improved operation with a large number of child objects.

Bug fixes

Fixed some errors in the ACS, FSA, PID modules. Improved the stability and performance of the system.

Features of the version

ACFA PSIM 1.3 is compatible with Axxon PSIM 1.0.1.1141 and higher. For more information on product version compatibility, see here.

You can download the ACFA PSIM 1.3 distribution package at www.axxonsoft.com.