You can manage the loop device of the Unipos7000 controller integration module in the Map and Equipment Board interface objects using the function menu of the Unipos7000 loop device object. To display the menu of the Unipos7000 loop device object, right-click the required object. Commands to manage the loop device of the Unipos7000 controller integration module are described in the table:
| Menu command | Function |
|---|---|
| Disable device | Disables loop device |
| Inhibit device | Locks loop device |
| Clear device fault | Clears loop device malfunction |
| Confirm device input | Confirms change of the input indication on loop device |
The following states of the Unipos7000 loop device object of the Unipos7000 controller integration module are possible:
| Arm |
| Combined detector |
| Comm error no connection |
| Device has fault |
| Device has fire indication |
| Device input is active |
| Device is disabled |
| Device is inhibited |
| Device isolator on |
| Device output is active |
| Disarm |
| Gas detector |
| Heat detector |
| Input open pre alarm |
| Input output device |
| Input short fault indicator |
| Manual call point |
| Measure error |
| Output open dirty chamber |
| Output short |
| Smoke detector |
| Sounder device |