To configure the output of the Satel GPRS-A integration module, do the following:

1. Go to the settings panel of the required output.
   
2. From the Output number drop-down list, select the number of the GPRS-A output.
3. From the Icon drop-down list, select the icon of the object to be displayed on the map.
4. Set the Reverse icon checkbox to reverse the logic of the displayed states on the map.
5. From the Notification mode drop-down list, select the type of object states displayed on the map: Active/Inactive, Normal/Failure, or Normal/Alarm.
6. Set the Require the operator to clear alarm from map checkbox to select whether the operator will have to delete the alarm message on the map after the transition from Alarm/Failure to Normal state.
7. Set the Emulate extra event checkbox to generate additional events for an object when its state changes.
8. In the Off/Normal state message field, enter the event description displayed in the Event Viewer for the Off/Normal state.
9. In the On/Failure/Alarm state message field, enter the event description displayed in the Event Viewer for the On/Failure/Alarm state.
10. Click the Apply button to save the settings.

Configuration of the output of the Satel GPRS-A integration module is complete.